Owner's Manual

50
Adjusting the Video Quality
(Digital Noise Reduction)
– DVD/Video CD
You can either select a preprogrammed setting designed
to match certain program types or make adjustments to
match your own preferences and save them in the
changer’s memory.
Selecting a preprogrammed setting
1 Press DNR.
2 Press ENTER.
Video Memory Select
Video Setup
ArtStandard
Memory1 Memory2 Memory3
Sports
3 Move the cursor control joystick to select one
of the preprogrammed picture quality settings.
Standard*: Preset that presents the source video
as it is, with no special adjustments.
Sports: Preset designed to be appropriate for
sports and similar media.
Art: Preset designed to be appropriate for art films
and similar media.
• If there is a DVD or Video CD playing, the effects
of each setting can be viewed while it is
highlighted on the screen. This may be useful in
selecting an appropriate setting.
•“Memory1”,“Memory2”, and “Memory3” are
user programmable settings. Refer to ‘Adjusting
the picture quality settings’ on the following page
for more information on customizing your own
picture quality settings.
*Factory setting
4 Press ENTER.
The new selection is set.
Note
Each picture quality setting is defined by a number of individual
settings, described in ‘Adjusting the picture quality settings’ on
the following page.
- +
DISPLAY AUDIO SUBTITLE ANGLE
SETUP
MULTI DIAL
TOP MENU
FUNCTION
MEMORY
SELECT
DISC No.
JOG MODE
OPEN/
CLOSE
POWER
STOP PLAY PAUSE
CLEAR
RETURN STEP
/ SLOW SEARCH MODE
ENTER
1
2
3C
DISC JOGDNR F.MEM
MENU STUP T.MNU
1
3
(Cursor)
2,4
(ENTER)