Owner's Manual

You can use the following systems by connecting the

DMI-40.4 and Integra/Onkyo amp or AV receiver

equipped with u jack by an u cable and an analog

audio cable.

■ System On

When you turn on your amp or AV receiver, the

DMI-40.4 turns on automatically.

■ System Off

When you turn off your amp or AV receiver, the

DMI-40.4 automatically go on standby.

■ Auto Power On

If you press the remote controller’s r/3 button

while your amp or AV receiver is on standby, your

amp or AV receiver will turn on automatically, select

your iPod/iPhone/iPad as the input source, and your

iPod/iPhone/iPad will start playback.

■ Direct Change

If you start iPod/iPhone/iPad playback while listening

to another input source, your amp or AV receiver will

automatically switch to the input to which the

DMI-40.4 is connected.

Note

• If you use your iPod/iPhone/iPad with any other

accessories, iPod/iPhone/iPad playback detection

may not work.

System Functions

Depending on your iPod/iPhone/iPad model and

generation, some of the linked operations may not

be available.