Manual

Advanced Settings (Setup Menu)
En-54
Setting Item Default Value Setting Details
TV Main Set the 12V trigger output setting to each
input.
"Off": No output
"Main": Output when "TV" is selected as input
for main room.
"Zone2": Output when "TV" is selected as
input for ZONE2.
"Main/Zone2": Output when "TV" is selected
as input for main room or ZONE2.
"Zone3": Output when "TV" is selected as
input for ZONE3.
"Main/Zone3": Output when "TV" is selected
as input for main room or ZONE3.
"Zone2/Zone3": Output when "TV" is selected
as input for ZONE2 or ZONE3.
"Main/Zone2/Zone3": Output when "TV" is
selected as input for main room, ZONE2 or
ZONE3.
TUNER Main Set the 12V trigger output setting to each
input.
"Off": No output
"Main": Output when "TUNER" is selected as
input for main room.
"Zone2": Output when "TUNER" is selected
as input for ZONE2.
"Main/Zone2": Output when "TUNER" is
selected as input for main room or ZONE2.
"Zone3": Output when "TUNER" is selected
as input for ZONE3.
"Main/Zone3": Output when "TUNER" is
selected as input for main room or ZONE3.
"Zone2/Zone3": Output when "TUNER" is
selected as input for ZONE2 or ZONE3.
"Main/Zone2/Zone3": Output when "TUNER"
is selected as input for main room, ZONE2 or
ZONE3.
Setting Item Default Value Setting Details
NET Main Set the 12V trigger output setting to each
input.
"Off": No output
"Main": Output when "NET" is selected as
input for main room.
"Zone2": Output when "NET" is selected as
input for ZONE2.
"Main/Zone2": Output when "NET" is selected
as input for main room or ZONE2.
"Zone3": Output when "NET" is selected as
input for ZONE3.
"Main/Zone3": Output when "NET" is selected
as input for main room or ZONE3.
"Zone2/Zone3": Output when "NET" is
selected as input for ZONE2 or ZONE3.
"Main/Zone2/Zone3": Output when "NET" is
selected as input for main room, ZONE2 or
ZONE3.
12V Trigger B
Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER
OUT B jack. Different settings can be set for each input selector. You can enable power link
operation when you connect the unit and the external devices equipped with 12V trigger
input jack.
Setting Item Default Value Setting Details
Delay 1 sec Set after how many seconds the 12V trigger
output will occur in response to the unit's
operation. As some devices cause a large
current when they turn on, delay the output if
such devices are connected. Select a value
between "0 sec" to "3 sec".