Manual

Advanced Settings (Setup Menu)
En-43
Dolby
Make the settings for Dolby listening mode.
Setting Item Default Value Setting Details
Loudness
Management
On Enable the Late Night function that allows
you to enjoy surround sound of Dolby TrueHD
playback even in low volume.
"On": Use this function
"Off": Do not use this function
Theater-Dimensional
Make the settings for Theater-Dimensional listening mode.
Setting Item Default Value Setting Details
Listening Angle Wide To enhance the effect of Theater-Dimensional,
select the actual angle of the left and right
front speakers as it appears from the listening
position.
"Narrow": Less than 30°
"Wide": Greater than 30°
● Position the front speakers 20° to the listening position if you have selected "Narrow" in "Listening
Angle" and 40° if you have selected "Wide".
LFE Level
Set the low-frequency effect (LFE) level of the Dolby Digital, DTS, Multichannel PCM and
DSD signals.
Setting item Default Value Setting Details
Dolby D/Dolby D+/
TrueHD
0dB Select the low-frequency effect (LFE) level of
each type of signal from "0dB" to "-∞dB". If the
low-frequency effect sound is too strong, select
"-20dB" or "-∞dB".
DTS/DTS-ES/DTS-
HD
0dB Select the low-frequency effect (LFE) level of
each type of signal from "0dB" to "-∞dB". If the
low-frequency effect sound is too strong, select
"-20dB" or "-∞dB".
● This setting works on LFE channel volume of
DTS, DTS-ES, DTS-HD High Resolution and
DTS-HD Master Audio sources.
Setting item Default Value Setting Details
Other Multich Source 0dB Select the low-frequency effect (LFE) level of
each type of signal from "0dB" to "-∞dB". If the
low-frequency effect sound is too strong, select
"-20dB" or "-∞dB".
● This setting works on LFE channel volume of
Multichannel PCM and DSD sources.
Volume
Make the detailed volume setting of the unit.
Setting Item Default Value Setting Details
Volume Display Absolute Switch the volume display between the absolute
value and relative value. The absolute value 82.0
is equivalent to the relative value 0.0dB.
"Absolute": Absolute value such as "0.5" to "99.5"
"Relative": Relative value such as "-81.5dB" and
"+18.0dB"
● If the absolute value is set to "82.0", "82.0Ref"
will appear on the display.
Muting Level -∞dB Set the volume lowered from the listening volume
when muting is on.
Select a value from "-∞dB", "-40dB" to "-20dB".
Maximum Volume Off Set the maximum value to avoid too high volume.
Select a value from "Off", "50" to "99". (When
"Volume Display" is set to "Absolute")
Power On Volume Last Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level
before entering standby mode), "Min", "1" to "99"
and "Max". (When "Volume Display" is set to
"Absolute")
● You cannot set a higher value than that of
"Maximum Volume".
Headphone Level 0 dB Adjust the output level of the headphones.
Select a value between "-12 dB" and "+12 dB".