Firmware Instructions

2. Alternatively, to force an update, select “SETUP” on the front panel, then
scroll and select “8.Misc”,  “F/W Update”  “Update Via NET” and press
ENTER.
● If "Firmware Update" is grayed out and cannot be selected, wait
for a while until it starts up.
● You will not be able to select "Update via NET" if there is nothing
to update.
3. Press ENTER with "Update" selected to start update.
● During the update, the TV screen may go black depending on the
updated program. In that case, check the progress on the display of
the unit. The TV screen will remain black until the update is
complete and the power is turned on again.
● "Completed!" is displayed when the update is complete.
4. Press ON/STANDBY on the main unit to turn the unit into standby
mode.The process is completed and your firmware is updated to the latest
version.
● Do not use RECEIVER on the remote controller.