Firmware Instructions

• Pull out the A/V receiver’s power cord;
• Interrupt the power supply to the A/V receiver (e.g. if the
breaker is tripped or if there is an electrical outage);
• Insert or remove the LAN cable from a device in your network
when updating over a network;
• Insert or remove a USB memory device from the A/V receiver
when updating via USB;
• Operate components connected to the A/V receiver via HDMI,
such as a TV or a recording device.
If your A/V receiver is damaged for any of the reasons above, an
Onkyo service center will repair the unit for a fee.
If you see "No Update" on the front panel immediately after you have
started the firmware update process, you have the latest firmware. In
this case it is not necessary to do this update.
How to prepare the USB Memory Device:
1. Download the zipped firmware update file and save to the Desktop of your
computer.
http://download.onkyo.com/AVR001E/ONKAVR001E_MA000000MAMAMA
MA_107.zip
2. Right click on the file and select “Extract All” and place the extracted folder
on the Desktop of your computer: