Firmware Instructions

ManualsBrandsIntegra ManualsAudio ReceiversIntegra Black 7.2 Channel Network AV Controller

Firmware Update DTR-50.7 & DHC-60.7

(6-5-2018)

We are pleased to offer this firmware update for the best possible

performance of your AV Receiver. It can be installed via Network

or USB. We recommend USB for faster, more reliable

installation.

DTR-50.7 & DHC-60.7

(Current Version

1060-4030-1104)

The 6/5/2018 update will address the following and includes

previous updates:

1. Improvement of audio output when playing back certain Dolby

Digital Plus contents.

Previous Updates:

The 8/31/2017 update will address the following and contains

previous updates:

Expand playable content of DTS:X.

2. Minor bug fixes and improvements stability.

The 8/31/2016 update will address the following:

1. DTS:X functionality*

* After applying the update, users must recalibrate using AccuEQ.

The 6/14/2016 update will address the following:

• Stabilizes video output of when HDMI Out is set to SUB.

• Fixes an issue with Network Standby not working when the IP

address is set to static.

The 9/30/2015 update will address the following:

• Improves ARC-related operation.

• Fixes Connection Issues with Deezer*

Summary of content (5 pages)

PAGE 1
Firmware Update DTR-50.7 & DHC-60.7 (6-5-2018) We are pleased to offer this firmware update for the best possible performance of your AV Receiver. It can be installed via Network or USB. We recommend USB for faster, more reliable installation. DTR-50.7 & DHC-60.7 (Current Version 1060-4030-1104) The 6/5/2018 update will address the following and includes previous updates: 1. Improvement of audio output when playing back certain Dolby Digital Plus contents.
PAGE 2
*Availability of service depends on region. Some service may require a paid subscription and firmware update. The 4/02/2015 update will address the following: • Improves the playback of particular audio format. To check if your firmware is the latest version, go in to Setup -> Misc. -> Firmware Update and check the version number. If any of the numbers differ from the latest version available, please update your unit.
PAGE 3
• Pull out the A/V receiver’s power cord; • Interrupt the power supply to the A/V receiver (e.g. if the breaker is tripped or if there is an electrical outage); • Insert or remove the LAN cable from a device in your network when updating over a network; • Insert or remove a USB memory device from the A/V receiver when updating via USB; • Operate components connected to the A/V receiver via HDMI, such as a TV or a recording device.
PAGE 4
1. Connect the USB Memory Device to the USB port of your computer and copy the contents of the unzipped/extracted folder onto your USB Memory Device. 2. Safely eject the USB Memory Device from your computer. How to upgrade the firmware via USB: 1. Insert the USB Memory Device containing the software into the USB port of the receiver. 2. Turn on the receiver and select the SETUP input on the front panel, then select “8.Misc”, press Enter, then “8.
PAGE 5
2. Alternatively, to force an update, select “SETUP” on the front panel, then scroll and select “8.Misc”,  “F/W Update”  “Update Via NET” and press ENTER. ● If "Firmware Update" is grayed out and cannot be selected, wait for a while until it starts up. ● You will not be able to select "Update via NET" if there is nothing to update. 3. Press ENTER with "Update" selected to start update. ● During the update, the TV screen may go black depending on the updated program.