Owner's Manual

EN
36
9.14 Switching Camera Angles
Some BD-videos and DVD-videos contain scenes which
have been shot simultaneously from various angles. You
can change the camera angle when
appears on the
TV screen.
1. During playback, press [Angle].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2. Use [Î / ï] to select your desired angle.
3. Press [Return] to exit.
D Note
• If “Angle Icon” setting is set to “Off”,
will not
appear on the TV screen.
• You can also change the angle setting from the
play menu. Play menu can be called up by pressing
[Mode].
9.15 Adjusting the Picture
You can adjust the picture quality and store
the setting you have adjusted on “Memory1” to
“Memory (Source Direct)”.
1. During playback, press [Mode] to display the play
menu.
2. Use [Î / ï] to select “Picture Control”, then press
[Enter].
3. Use [Î / ï] to select a memory from “Memory1” to
“Memory (Source Direct)” to store your setting, then
press [Enter].
• When setting to “Source Direct” in
“Video Resolution”, “Picture Control” will be set
to “Memory(Source Direct)” automatically.
Picture Control
Memory1
4. Use [Î / ï] to select an item to be adjusted, then
press [Enter] and use [Î / ï] to adjust the setting.
Brightness
Contrast
Noise Reduction Off
Item Description Adjustment range
Contrast
Adjusts the
difference between
the bright and dark
parts of the picture.
-7 to +7 (0*)
Brightness
Adjusts the
brightness of the
picture.
0 to +15 (0*)
Sharpness
Adjusts the
sharpness of the
picture.
-6 to +6 (0*)
Gamma Correction
Adjusts the dark
positions of the
picture.
0 to +5 (0*)
Color
Adjusts the balance
between green and
red.
-7 to +7 (0*)
Black level
*1
Adjusts the black
level.
On
*
: Makes the
dark parts
brighter.
Off : Shows the
original
picture as
recorded.
Noise Reduction
Reduces the noise of
the playback picture.
On : Activates
the Noise
Reduction.
Off
*
: Deactivates
the Noise
Reduction.
*
) default setting
*
1
) Not effective for the video signal of VIDEO OUTPUT
(COMPONENT) jacks (except 480i) and HDMI OUT jack.
D Note
• The setting remains even you turn the unit into the
standby mode except unplug the AC cord.
• Adjusting the picture is effective for HDMI OUT jack,
VIDEO OUTPUT (COMPONENT) jacks and VIDEO
OUTPUT (VIDEO) jack.