Owner's Manual

EN
28
8.2 Playing Back a Blu-ray 3D™ Disc
This unit can play back Blu-ray 3D™ discs which contain
stereoscopic 3D video. In order to view Blu-ray 3D™
videos, you need to have the following:
– 3D capable TV
– 3D compatible HDMI cable
– 3D glasses
– Blu-ray 3D™ Disc or Blu-ray 3D™ only Disc
1. Connect 3D capable TV with a 3D compatible HDMI
cable.
• Refer to “HDMI Video / Audio Connection” on
page 18.
2. Insert a Blu-ray 3D™ Disc or a Blu-ray 3D™ only
Disc.
• Refer to “How to Insert a Disc” on page 26.
3. Playback may start automatically. If not, press
[B (play)].
Some discs may show a title or a disc menu. In this
case, refer to “Using the Title / Disc / Pop-up Menu”
on page 30.
To pause playback:
Press [Δ (pause) ].
To return to normal playback:
Press [B (play)].
To stop playback:
Press [Ê (stop)].
Playback will be in Resume-On-Stop mode, and the
home menu will appear.
■ Resume-On-Stop Mode
When you press [B (play)] next time, the playback
will start from the point where it has been stopped.
C Caution
• Watching 3D videos may cause headache, dizziness or
tiredness. To avoid such consequences, do not watch
3D videos for a long period of time.
• Watching 3D videos is not recommended for the
following people:
– People who are susceptible to motion sickness
– Children from walking age to seven years
– Pregnant woman
For more information, refer to “IMPORTANT HEALTH
AND SAFETY INFORMATION FOR 3D TELEVISIONS”
on page 54.
D Note
• For more information, refer to the 3D TV’s manual.
• When “3D Output” is set to “Auto (XX)” and your
TV is not 3D capable, playback of Blu-ray 3D™ discs
will revert to 2D depending on the disc.
• You can turn off 3D output mode by setting
“3D Output” to “2D”. (Refer to page 38.)
• For some Blu-ray 3D™ only discs, playback in 2D
mode is not possible.
• You can check the current output mode (2D or 3D)
by pressing [Display] during playback.
• If you change “3D Output” setting to “2D” while the
unit is in the Resume-On-Stop mode of Blu-ray 3D™
Disc playback, the resume information will be cleared.
8.3 Playing Back a USB Flash Drive
You can play back MP3 / WMA / JPEG files in a USB flash
drive. With the USB flash drive, you can also enjoy the
following functions.
– Special additional contents for BD-ROM Profile 1
ver.1.1. (For more information about the special
additional contents, refer to the instruction book that
came with the disc.)
– BD-Live™ function (BD-ROM ver. 2 Profile 2.0). (For
more information about BD-Live™, refer to page 33.)
1. Connect a USB flash drive.
2. Press [Home
].
3. Use [Î / ï / Í / Æ] to select “USB”, then press
[Enter].
• If a USB card reader or USB hub is connected,
drive selection screen appears. Use [Î / ï / Í / Æ]
to select a drive you want to access, then press
[Enter].
4. Follow steps 2 to 3 in “Playing Back a Disc” on page 27.
To remove the USB flash drive
In stop mode, pull it out slowly.