Owner's Manual

8
Controls & ConnectQrs-Continued
6 5
For detailed information, refer to the pages in parenthe-
sis.
Ci) ANALOG AUDIO OUTPUT (11, 12)
These RCA/phono connectors can be connected to
the analog audio inputs on a hi-fi amp
or AV
receiver.
® COAXIAL & OPTICAL DIGITAL AUDIO
OUTPUT (11)
These connectors can be used to connect a CD-R,
MiniDisc,
DAT recorder, digital amp, or other
equipment with digital inputs.
@ R I REMOTE CONTROL {11, 12)
These R I (Remote Interactive) connectors can be
connected to the
R I connectors on your other Inte-
gra/Onkyo
AV components for interactive control.
To use R I you must also make analog audio con-
nections (RCA/phono) between the CDC-3.4 and
your other Integra/Onkyo equipment.
4
@ AC INLET (14)
The supplied power cord is connected here. The
other end
of the power cord should be connected to
a suitable wall outlet.
@ RS232
This RS-232 port can be connected to an external
controller.
@ IR IN/OUT {13)
The IR IN connector can be used to connect a com-
mercially available IR receiver, which can be used
to pickup signals from the remote controller when
the CDC-3.4 is located
in another room, installed in
a rack, or is out
of range of the remote controller.
The IR OUT connector can
be used to connect a
commercially available
IR emitter, which can be
used to pass remote controller signals received
by
theIR IN along to other AV components.