Owner's Manual

24
MP3
&
APD
(Auto
PoVI!er
Down) Preferences
This section explains how to set various preferences for
MP3
discs and the
APD
(Auto
Power Down) function.
Preferences
are divided into two groups: Basic and
Extra.
You must use the
buttons on the CDC-3.4 to set these
preferences, not the remote controller.
1.
Stop
playback.
If
the Memory function is on, tum it off.
2.
Press
and
hold the
Stop
£•]
button until
"SET-
TING"
appears on the display (about 4 seconds).
3. Press the
Stop
[•]
button again.
"BASIC ITEMS"
appears on the display.
4.
Use
the[~]/[..,...]
buttons to select
"BASIC
ITEMS"
or
"EXTRA ITEMS,"
and
then press
the
Stop
£•1
button.
5.
Use
the
[~]/[..,...]
buttons to select a setting
for the first preference,
and
then press the
Stop
£•1
button.
The preference is set and the next preference
appears.
6. Repeat steps 5 to set
the
other
preferences.
When all the preferences in the group have been set,
the previous display reappears.
If
you want to cancel this procedure at anytime,
press the [Standby] button. The CDC-3.4 will enter
Standby mode.
The
Ba
sic and Extra preferences are explained in the fol-
lowing sections. The settings available for each prefer-
ence are shown in parenthesis, with the default setting on
the left.
Basic Items
DISC
NAME
(DISPLAY/NOT DISPLAY)
This preference determines whether
or
not the disc name
is displayed when an MP3
disc is read.
TRACK NAME (SCROLL/NOT SCROLL)
This preference determines whether or not the track
name scrolls across the display when an
MP3 track is
selected.
FOLDER
NAME
(SCROLL/NOT SCROLL)
This preference determines whether or not the folder
name scrolls across the display when an
MP3
folder is
selected.
BAD NAME (REPLACE/NOT REPLACE)
This preference determines whether
or
not track and
folder names that contain undisplayable characters are
replaced with
"TRACK n"
or
"FOLDER n
,"
"n
"
being
the track
or
folder number. When set to
NOT REPLACE,
displayable characters are displayed and underscores are
used in place
of
any undisplayable characters.
For ID3 tags, underscores are used in place
of
undisplay-
able characters regardless
of
this
pr
eference.
APD
(ON/OFF)
This preference turns the Auto
Power
Down function
ON
or
OFF.
When set to
ON, the Auto
Power
Down
function will automatically
set the CDC-3.4 to Standby
when playback has stopped and there's no operation for
30
minutes. The default setting for North American
models is
OFF.
For other models it's
ON.
Note:
Track and folder names are scrolled in Navigation mode
(page
17)
regardless
of
the TRACK NAME and
FOLDER NAME preferences.
Extra Items
103
VER
1
(READ/NOT READ)
This preference determines whether
or
not version
1.0/
1.1
tags are read and displayed. When set to
NOT
READ, version
1.0/l.l
tags will not be displayed.
103
VER 2 (READ/NOT
READ)
This preference determines whether
or
not version 2.3/
2.4 tags are read and displayed. When set to
NOT
READ, version 2.3/2.4 ID3 tags will not
be
displayed.
CD-EXTRA
(AUOIO/MP3)
This preference applies to CD Extra discs and deter-
mines whether music in the audio session
or
MP3 tracks
in the data session are played.
JOLIET (USE SVD/IS09660)
This preference applies to
MP3
discs in Joliet format and
determines whether the CDC-3.4 reads the SVD data
or
treats the disc as an
ISO 9660
disc. Normally, this pref-
erence doesn't need to be changed.
SVD (Supplementary Volume Descriptor) supports long
file and folder names and characters other than letters
and numbers. Some CD burning software refers to the
Joliet format as "Windows format."
This section explains how to initialize the
MP3
prefer-
ences to their default values.
You must use the buttons on the CDC-3.4 for this proce-
dure, not the remote
controller.
1.
Stop playback.
If
the Memory function is on, tum it off.
2. Press
and
hold the
Stop
[•]
button until
"SET-
TING"
appears on the display (about 4 seconds).
3. Press the
[~]/[..,...]
button.
"INITIALIZE"
appears on the display.
4. Press the
Stop
[•]
button.
"CANCEL"
appears
on
the display.
5.
Use
the
[~/[~
buttons to select "EXECUTE."
If
you want
to
cancel this procedure, select
"CANCEL."
6. Press the
Stop
£•1
button.
The
MP3 preferences are initialized,
"INITIAL-
IZED"
appears on the displ
ay,
and then the CDC-3.4
enters Standby mode.