Owner's Manual

Basic
Playback-Continued
Notes:
To
start playback, press the Play/
Pause button.
(··~.n
j
~CD
2
,'I
1..
..1
·i...)
[ 4 5 .
Playback starts from the first track on
the current disc, continues with the sub-
sequent discs, and stops when disc #6
has been played.
Empty disc bays are skipped.
Tip:
If
you press one
of
the Disc Select
buttons, playback
of
the selected disc
will start automatically.
When you close the disc tray, the current disc will be
the one in the front-right disc bay. When you open the
disc tray, the last disc you selected (i.e., the current
disc), will be in the front-right disc bay.
When the disc tray is closed, all
of
the disc indicators
appear until the CDC-3.4 has checked each bay for the
presence
of
a disc.
If
a bay is found to have no disc, the
corresponding indicator disappears.
The section explains how to select discs.
When playback is stopped
Use the Disc Select buttons to select a
disc. Playback will start automatically.
Or, use the [Disc Skip] button or the
remote controller's
Disc[+]
and[-]
buttons to select a disc. In this case
you'll need to press the
Play[~]
button
to start playback.
During playback
Use the Disc Select buttons, [Disc
Skip] button, or the remote controller's
Disc [
+]
and [-] buttons to select a disc.
The current disc will stop playing, and
the newly selected disc will be played.
On the display, the number
of
the cur-
rent disc has a circle around it.
This section explains how to load discs without stopping
playback.
Note:
To
open the disc tray, press the
Open/Close button.
The disc that's currently playing
remains inside the CDC-3.4 and its disc
bay is empty and
won't
come to the
front.
Load or remove your discs, and
use the [Disc Skip] button or the
remote controller's Disc [
+] and
[-]
buttons to access the other
disc bays.
To
close the disc tray, press the
Open/Close button again.
Playback
of
the current disc continues
uninterrupted until you stop playback
or select another disc.
Tip:
If
you press one
of
the Disc Select
buttons, the disc tray will close, and
playback ofthe newly selected disc will
start automatically.
The CDC-3.4 cannot play the next disc while the disc
tray is open. Be sure to close the disc tray as soon
as
you've finish loading discs.
You can adjust the brightness
of
the display
as
follows.
Press the [Dimmer] button
repeatedly to cycle through the
following options: normal, nor-
mal with disc tray light off, dim
with disc tray light off, dimmer
with disc tray light off.
15