Installation Guide

TWV Series Patio Cover

Installation Guide

Step 4-D&E: Preparing & Fastening Posts to the Front Fascia

Cut the first Post, slip it over the Top Post Bracket on that low side. Drill two 3/8” holes completely

through the post and the post bracket. Insert 2 3/8” x 3 ½” holes through the post and brackets

And fasten using 2 3 ½” thru bolts. Insert two 3/8 x 3 ½ screws through the bolts and fasten.

Insert the bottom post bracket into the bottom of the post; drill two 3/8” holes through the posts

and brackets. Fasten using two 3 1/2” screws through the bolts.

Step 4-F: Preparing & Fastening Posts to the Front Fascia

Place a ladder at the first end post for Person #1, place 2

ladder near the opposite end post for

Person #2. Stand up the attached Post and Front Fascia assembly while Person #2 is holding the

Front Fascia level and holding a Post against the Front Fascia.