Installation Guide

TWV Series Patio Cover

Installation Guide

Step 4-A&B: Preparing & Fastening Posts to the Front Fascia

Place a level on the front edge of the slab to determine which is the low end of the slab—the left

or right side. After determining the low side, measure from the slab up to the bottom of the

Hanging Channel on that low side. You are determining the measurement for “E” depicted at right.

Step 4-C: Preparing & Fastening Posts to the Front Fascia

Then subtract 2 inches and subtract ½” per foot of depth of your patio cover. For example, if

you have an 8’ deep x 14’ wide patio cover, use this formula: 8’ x ½” = 4 inches. If you measured

98” from the bottom of the hanger you will subtract 98”-2” = 96”. Then 96”-4” = 92” for your first

post length.