Installation Guide
TWV Series Patio Cover
Installation Guide
Step 2-C: Setting the Hanging Rail & Hanging Channel
Pre-drill 3 holes in the Hanging Rail using a 3/16” drill bit 2 inches from each end and one in the
center. Fasten the Hanging Rail using #12 x 3” wood screws, keeping it level. Now mark the
location of the wall studs or roof rafter truss ends onto the hanging rail.
Step 2-C: Setting the Hanging Rail & Hanging Channel
Pre-drill the 3/16” holes and fasten the rail using #12 x 3” wood screws.
11










