Installation Guide

THE FORCE / 2
Maintenance, Cont.
MAINTENANCE
Recommended gearbox oil:
Model 22014
Capacity: 48 oz.
Temperature 40˚ - 100˚ F Mobil SHC 634 gear lube
Temperatures -20˚ - +40˚ F Mobil 1 synthetic 5W-30
Gearbox/Agitator/Airlock Unjamming procedure: Empty hoper,
disconnect all electrical cords to machine. Tip machine upside down onto hopper.
Remove agitator motor cover on outside of machine (black plastic). Locate and
remove fan cover on agitator motor.
Note: Depending upon the motor used it will
be necessary to remove the screws holding the fan cover on before removal,
otherwise all other co
v
ers may be pried off using screwdriver. By hand, carefully turn
fan blade counter-clockwise until jam is cleared.
Note: It will take approximately 15
tur
ns of
the fan blade before you start to reverse the entire airlock system.
Caution!
Fan blade may br
eak if excessive for
ce is used.
Note:
T
he g
earbo
x and the air
lock must be perpendicular to each other. Proper
alignment prevents premature wear on the gearbox and airlock shaft connection.
Drain & Fill plug
Model 22014
Vent Plug
1
⁄4 -
1
⁄2 Turn to Vent
22
Removing Cover Rotation Label Turn by hand Using Screw Driver