Intec Industries Co., Ltd. Room 2703, Well Tech Centre 9 Pat Tat Street, San Po Kong, Hong Kong Tel : (852) 2885 1100 Fax : (852) 2947 0588 SPECIFICATION Type: Model No.
Intec Industries Co., Ltd. Room 2703, Well Tech Centre 9 Pat Tat Street, San Po Kong, Hong Kong Tel : (852) 2885 1100 Fax : (852) 2947 0588 1. PREFACE This specification applies to the Intec Nickel-Metal Hydride Cylindrical batteries or battery packs. Intec reserves the right to alter the product design or amend this specification without prior notice. 2. RATINGS ★ ★ ★ ★ ★ ★ ★ ★ ★ Nominal voltage: 1.2 V. Nominal capacity: 1200 mAh(0.2C5). Standard charge: 120 mA×14h. Fast charge: 1200 mA×1.2h.
Intec Industries Co., Ltd. Room 2703, Well Tech Centre 9 Pat Tat Street, San Po Kong, Hong Kong Tel : (852) 2885 1100 Fax : (852) 2947 0588 4.2 TEST METHOD AND CELL PERFORMANCES 4.2.1 APPEARANCE No conspicuous stretches which influence the value of the battery. 4.2.2 CAPACITY Charge with 0.1C for 14 hours then discharge with 0.2C to the end-voltage 1.0 V/unit, the capacity shall be more than 1200 mAh. 4.2.
Intec Industries Co., Ltd. Room 2703, Well Tech Centre 9 Pat Tat Street, San Po Kong, Hong Kong Tel : (852) 2885 1100 Fax : (852) 2947 0588 4.2.10 LIFE-SPAN(EXPRESS) The battery shall supply 720 mAh at the 400th cycle under the conditions as follows. Charge Discharge 1C5 for 72 minutes 1C5 to 1.0V/unit 4.2.11 STORAGE Within 14 days, the battery shall not cause leakage at 30-60℃ with the relative humidity at 75%-85%. 4.2.
Intec Industries Co., Ltd. Room 2703, Well Tech Centre 9 Pat Tat Street, San Po Kong, Hong Kong Tel : (852) 2885 1100 Fax : (852) 2947 0588 Typical characteristics Specifications Nominal Typical Diameter Height Weight Internal impedance at 1000Hz. Standard Quick Charge Max. Min. Standard Charg e Quick Discharge Storage Trickle Ambient temperature 0℃ 1.5 20℃ 1.4 45℃ 1.3 1.2 Charge:120mA 1.1 1 0 2 4 6 8 Charge Time(Hrs) 10 12 14 16 Rapid charge at various temperatures 1.8 1.7 10℃ 1.
Intec Industries Co., Ltd. Room 2703, Well Tech Centre 9 Pat Tat Street, San Po Kong, Hong Kong Tel : (852) 2885 1100 Fax : (852) 2947 0588 Ce ll c a pa c it y (a t va rious disc ha rge ra t e ) 110 Charge:0.15CX12h. Discharge: End Volt 1.0±0.1V. at:20℃ 100 Available capacity(%) 90 80 70 60 50 40 30 0 1 2 3 4 Discharge rate(c) 5 6 7 8 Cycle Characteristics 120 Available Capacity(%) 100 80 Capacity measuring conditions: Charge:0.1CX15h. Disharge:0.2C EV=1.0±0.1V. Temperature:20℃.
