User's Manual

1 SERVICE AND
Support
1
1 Service and Support
The information in terms of service and support for FUNMAT PRO 410, as well as the safety information
and safety label position are provided in this chapter.
1.1 Service
Please contact INTAMSYS customer support for any problem not covered by this guide during your use of
the printer.
Region E-mail Tel.
Asia Pacific [e-mail] [phone]
Europe, Middle East and Africa [e-mail] [phone]
North America / Latin America [e-mail] [phone]
1.2 Safety Instructions
Following basic safety instructions are provided to ensure the safe installation, operation and
maintenance of INTAMSYS equipment, which shall not be regarded as the comprehensive safety
problems. FUNMAT PRO 410 Printer is a safe and reliable 3D printer in industrial grade. There is potential
hazard in the printer overhauling area.
1.2.1 Classification of hazards
It is recommended by INTAMSYS that all services should be executed by qualified personnel. All
personnel operating the printer or near by the printer shall understand the meaning of following hazard
classification used in this guide.
[HIGH VOLTAGE]: The sign of high voltage indicates the existence of high voltage. Be sure to keep away
from exposed circuits. It is suggested to take off all accessories.
[HIGH TEMPERATURE]: It indicates that the equipment is in high temperature. Take extra care when
working near by heated components. Be sure to wear the safety gloves provided in the attachment tools.
The temperature of printing nozzle in the printer can reach up to 500℃.
The temperature of printing buildplate in the printer can reach up to 160℃.
The temperature of chamber in the printer can reach up to 90℃.