User's Manual

4 USER INTERFACE

4.1.2 Navigation bar

The navigation bar is displayed on each main page of the User Interface, providing the single touch

access to the printer's function of “Print”, “Tune”, “Axis”, “Material” and “System”. The User Interface is

decomposed to multiple pages containing the related functions. Selection of one button in the navigation

bar will open the page corresponding to such button, where the relevant tasks in the page can be

executed. Where a page contains sub-pages or wizard, the additional buttons corresponding to these

items will be displayed in the display area of such page above the navigation bar.

Figure 4. 5 Navigation bar

The buttons in the navigation bar are mutually exclusive, which means only one button can be selected in

any given time. In some cases, all or part of the buttons in the navigation bar will be disabled.

4.1.3 Display area

The display area is used to display the relevant information corresponding to the functional module

selected, including the operation button, text description, image display or motion graphics schematic, etc.

When the user selects different functional module, the display area will be switched to the contents

corresponding to the functional module selected.

• After the machine is powered on and started up, this area will display the contents corresponding

to printing functional module as default.

• When the corresponding icon in navigation bar is selected, the area will be switched to the

settings or display interface related to such state

• After the corresponding functional button in navigation bar is selected, the display area will be

switched to the operation interface of the corresponding functional module.

• During the use of wizard, the display area will display the contents corresponding to different

steps according to the operation sequence.

4.2 Print Interface

The “Print” page is composed of three main functional areas, which are the essential parts to select and

execute model printing on the printer. In the “Print” page, you may choose to print documents, start, pause