User manual

SGM PilotBox Safety
1 Safety
The Safety section provides an overview about the safety instructions, which must
be observed for the operation of the product.
The product is constructed according to the currently valid state-of-the-art technol-
ogy and reliable in operation. It has been checked and left the factory in flawless
condition concerning safety. In order to maintain this condition during the service
life, the instructions of the valid publications and certificates must be observed and
followed.
It is necessary to adhere to the general safety instructions must when operating the
product. The descriptions of processes and operation procedures are provided with
precise safety instructions in the respective sections in addition to the general
safety instructions.
Moreover, the local accident prevention regulations and general safety regulations
for the operating conditions of the device are effective.
An optimum protection of the personnel and the environment from hazards as well
as a safe and fault-free operation of the product is only possible if all safety instruc-
tions are observed.
1.1 Usage According to the Regulations
The SGM PilotBox serves as electric vehicle charging point control. It is usually installed in
a junction box that contains a residual current operated device (RCD), a miniature circuit
beaker (MCB), a load contactor, a power supply unit and the charging socket besides the
SGM PilotBox.
The SGM PilotBox does not contain any WAN or LAN communication. It is designed as
charging point control without a clearing system, e.g. for private charging points.
However, the SGM PilotBox can be enhanced to a charging point control for intelligent
charging using a control logic (e.g. PLC).
5