Datasheet

44 Command Overview INSYS WLAN serial
Command Description
+++
Escape sequence
If the sequence “+++” is sent during an active connections with at least 1 second pause
before and after the sequence, the module will terminate the connection.
Unlike the modem, no online command mode is supported.
7.2 Responses and Numerical Codes
The following message texts (with setting ATV1) or message numbers (with setting ATV0)
are displayed by the module:
Message number Message text Meaning
Short form Long form
(
ATV0) (ATV1)
0 OK Command was accepted
1 CONNECT Connection was established
2 RING Connection request was recognized
3 NO CARRIER Connection was terminated
4 ERROR Error in
AT command string
7 BUSY Remote terminal did not accept connection
version 1.01 / 10.04