Datasheet

Implementation and Configuration INSYS WLAN serial 33
Example: Query the settings of the INSYS WLAN serial (AT&V)
6.4 Firmware Update
Attention! Before the firmware is uploaded, hardware handshake (RTS/CTS) must be
activated at the terminal program and the INSYS WLAN serial.
The command AT** will start the upload process and the device will prepare itself for
receiving the firmware.
After the response Send file now the firmware (file with the ending HEX) is sent as a
text file.
After the file has been received the device needs up to 60 seconds to complete the
upload. The INSYS WLAN serial resets autonomously after the upload.
In Chapter 7 you will find a complete description of the AT commands and their
parameters.
version 1.01 / 10.04