Datasheet

8 Technical Data
Description of the signals on the 9-pin D-SUB connector
Pin Description Function CCITT
V-24
EIA
RS232
DIN
66020
E/A DCE to
DTE
1 DCD Data Carrier Detect 109 CF M5
O
2 RXD Receive Data 104 BB D2
O
3 TXD Transmit Data 103 BA D1
I
4 DTR Data Terminal Ready 108 CD S1
I
5 GND Ground 102 AB E2
6 DSR Data set ready 107 CC M1
O
7 RTS Request to send 105 CA S2
I
8 CTS Clear to send 106 CB M2
O
9 RI Ring Indication 125 CE M3
O
Supported interface speeds of the RS232 for the INSYS WLAN serial:
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200 bps.
The baud rate indicates the transmitted bits per second (bps).
Supported data formats:
(Number of data bits, parity, number of stop bits) 8N1, 8E1, 8O1, 8N2, 7E1, 7O1,
7N2, 7E2, 7O2
Handshake:
Hardware handshake via the signal lines RTS/CTS or no handshake
3.5.2 Ethernet, 10 Base-T
Attention! This interface is only active for the INSYS WLAN bridge.
View of the RJ45 jack
version 1.01 / 10.04