Datasheet

Technical Data 7
Layout of the terminals on the cover bottom
Terminal Labeling Description
11 OUT 1-NC Output 1 – normally closed contact
12 OUT 1 Output 1, COM
13 OUT 1-NO Output 1 – normally open contact
14 OUT 2-NC Output 2 – normally closed contact
15 OUT 2 Output 2, COM
16 OUT 2_NO Output 2 – normally open contact
3.4 Power Supply
Power supply: 10…60 V DC, 5% ripple
In addition, a second power supply range 50…80 V DC is
possible. This, however, must be ordered separately, if
required.
Power input: Approx. 3 W (during connection)
Current consumption:
Current consumption at
10VDC approximately
280mA
Current consumption at
24VDC approximately
120mA
Current consumption at
36VDC approximately
80mA
3.5 Interfaces
3.5.1 Serial Interface
Attention! This interface is only active for the INSYS WLAN serial.
View of the 9-pin D-SUB jack
version 1.01 / 10.04