Datasheet
INSYS ETHERNET 5.X Introduction
Nov-06 7
Online availability
The manuals are available in German and English at http://www.insys-tec.de.
Conventions
In the user manual, the devices of the INSYS Ethernet 5.x series are referred to as IN-
SYS Ethernet. Only if there are differences between the devices will the complete device
name be used.
Emphasis
Representation
Meaning
"Basic settings" Software HSComm GUI texts, e.g. button, entry field, tab
description
AT
AT command
<expression>
Entering of the parameter for an AT command
[expression
]
Entering of the optional parameter for an AT command
OK
Response of an AT command
Additional documentation
The additional software offered from INSYS in this context will be delivered in electronic
format, together with the relevant documentation.
Software HSComm
The software HSComm Ethernet is available for the configuration of the INSYS Ethernet.
The following system requirements are necessary for HSComm:
Windows 2000
Windows XP
The configuration software is available for download at the following address:
http://www.insys-tec.de
Software VCOM Port
The software INSYS VCOM Port is available to establish a virtual COM port. This means
that a PC application under Microsoft Windows can more or less address the serial inter-
face on the INSYS Ethernet via a local COM interface that is connected ahead. The virtual
COM port driver transforms the IP data into transparent data for the application.
The following system requirements are necessary for the INSYS VCOM Port:
Windows 2000
Windows XP
The virtual COM Port can be downloaded from the Internet:
http://www.insys-tec.de
Technical support
Reach the technical support at: