Datasheet

INSYS ETHERNET 5.X Functions and their Configuration
Nov-06 35
Note
If the AT command mode at the serial interface was deactivated
with AT&X0, Telnet access is the only access option.
Note
For operational safety reasons, an existing Telnet remote configura-
tion is terminated as soon as a new Telnet connection to the INSYS
Ethernet is established.
As TELNET terminal for control functions via AT commands, INSYS MICROELECTRONICS
recommends TeraTerm by T. Teranishi. The free software can be downloaded at
http://www.vector.co.jp/authors/VA002416/teraterm.html.
Pertinent AT commands
AT#TLU="<User
name>"
User name for the Telnet connection (default = insys)
AT#TLP="<Pass
word>"
Password for the Telnet connection (default = insys)
AT#TEL=<n>
Telnet port number (default = 23)
7.2 Basic Settings
The basic settings of the RS232 interface can be configured in the Software HSComm on
the tab "Basic settings".