Datasheet

INSYS ETHERNET 5.X Configuration Software HSComm Ethernet
Nov-06 33
Use the button "Synchronize RS232" to test all possible baud rate and data format set-
tings at the PC side until both sides match.
6.2.3 Status Bar
The status bar at the lower window border of the HSComm displays the setting and ac-
tivities of the serial interface of the configuration PC.
The LEDs RX and TX of the INSYS Ethernet light up synchronously during the receiving
and sending of data.
6.2.4 Tabs
The settings of the basic and extended settings are spread across several tabs, which can
be selected via the tab titles.
The performed settings will only be transmitted to the INSYS Ethernet when you click on
the button "Send".
The individual functions are described in detail in the Chapter "Functions and their con-
figuration".