Datasheet

Configuration Software HSComm Ethernet INSYS ETHERNET 5.X
32 Nov-06
Help
The context sensitive help is available any time via the key F1 or the "Help" menu.
6.2.2 Buttons
Use the buttons to start data transmissions between the INSYS Ethernet and the con-
figuration PC. During the data transmission a progress bar will be displayed above the
buttons. All inactive buttons are highlighted in gray.
Read
Use this button to read the current settings from the INSYS Ethernet. The current set-
tings are now displayed in the HSComm.
Reset
Use this button to restart the INSYS Ethernet.
Default settings
Use this to load the factory settings into the INSYS Ethernet. Afterwards, a restart is per-
formed.
Send
Use this button to transmit the current settings in the HSComm to the INSYS Ethernet.
Abort
Use this button to cancel running data transmissions, e.g. for "Send" or "Read".
Synchronize RS232
The serial interfaces of the INSYS Ethernet and the configuration must be configured
equally.