Datasheet

Overview INSYS ETHERNET 5.X
10 Nov-06
 Serial V.24/V.28 interface with 9-pin D-SUB jack and terminal
level at V24 interface according to V.28
 Ethernet connection: 10Base-T on RJ45 an terminal
 2 inputs, pull-up, terminal
 2 switching outputs (potential-free relay), terminal
 Reset key and terminal
 4 LEDs for status display
Communication
 Integrated TCP/UP stack for modem-compatible dialing of IP addresses or domain
names, with transparent transfer of data from and to the serial interface (“TCP
transparent”).
 Protocols: ARP, ICMP, TCP/IP, UDP/IP, DHCP, DNS
 Hardware handshake (RTS/CTS) and software handshake (Xon/Xoff)
 Fixed speed setting
(300, 600, 1.200, 2.400, 4.800, 9.600, 19.200, 20.833, 38.400, 41.667, 57.600,
115.200)
 Extended data formats for the serial interface
(8N1, 8E1, 8O1, 8N2, 7E1, 7O1, 7N2, 7E2, 7O2)
Additional functions
 Extended AT command set (INSYS AT command for additional functions)
 Option to configure via TELNET (remotely) or RS232 (locally)
 Password protection for remote configuration
 Leased line function
 3 configurable TCP block formation algorithms
 Firmware update of the µ controller (locally and remote)
 Idle connection control (Data Transmit Control)
 I/O tunneling, signal transfer input to output
 Keep Alive function
 PC configuration software HSComm Ethernet
 Support for the virtual COM port driver from
INSYS MICROELECTRONICS GmbH.
 Hardware watchdog