Datasheet

INSYS GPRS 5.0 Ethernet Functions
Dez-06 39
The status page displays the current state of the INSYS GPRS 5.0 Ethernet. In detail, the
following information is provided:
IMEI: Unique, 15-digit ID of the GSM engine
Network provider: Name of the network provider where the device is currently
logged in at
4
Signal strength: Current strength of the GSM radio signal (see Chapter 3.7
Display and Control Elements)
Bit error rate: Current bit error rate
Network status: 0 – Not registered, no network search
1 – Registered at the standard network provider
2 – Not registered, searching for GSM network
3 – Registration rejected by provider
5 – Registration via roaming partner
WAN IP address: IP address, which the INSYS GPRS 5.0 Ethernet was allocated
on its public side from the PPP server.
First DNS server: First DNS server that was provided by the GPRS provider
Second DNS server: Second DNS server that was provided by the GPRS provider
LAN IP address: Currently configured IP address of the INSYS GPRS 5.0
Ethernet on the local side
LAN Sub network mask: Currently configured sub network mask of the INSYS GPRS 5.0
Ethernet on the local side
LAN MAC address: MAC address of the INSYS GPRS 5.0 Ethernet
Firmware version: Firmware version number
Input 1/Input2: These fields show the status of the two inputs
(low or high).
Function: make the according interface accessible
(see Chapters 5.5.3 und 5.5.4)
DynDNS status: Displays the status of the DynDNS registration of the current
WAN IP address. (See Chapter 5.5.6)
4
The T-Mobile name is not always correctly transmitted. Instead, only CC 262 NC 01 for country no. 262
and network no. 01 are displayed.