Datasheet

INSYS GPRS 5.0 Ethernet Installation
Dez-06 21
10. Enter the IP settings
Note
Before you change the settings, annotate the old settings to be able
to restore the configuration of your computer after the successful
configuration of the device.
Note:
The manufacturer has set the default IP address 192.168.1.1 (Sub network mask:
255.255.255.0) for the INSYS GPRS 5.0 Ethernet.
To be able to address the INSYS GPRS 5.0, the PC must receive an IP address from the
same sub network, e.g. 192.168.1.9.
For the PC to enable an Internet connection via the INSYS GPRS 5.0 Ethernet, the IP set-
ting for the standard gateway must be the address of the INSYS GPRS 5.0 Ethernet.
Default settings for the INSYS GPRS 5.0 Ethernet:
 IP: 192.168.1.1
 Sub network mask: 255.255.255.0
The INSYS GPRS 5.0 Ethernet may also serve as a DNS server. If the IP address of
the INSYS GPRS 5.0 Ethernet is entered as DNS Server, the LAN applications can
also establish Internet connections by entering the domain name (e.g.
www.insys-tec.de).