Datasheet

INSYS GPRS 5.0 serial Connection
Mai 06 31
Alternatively, the settings for the leased line operation can be
entered or modified using the terminal program.
Connection to an IP address
Setting for leased line function
Remote terminal IP address
Remote terminal IP port
Save settings
Perform RESET, accept all parameters
Connection to a domain name
Setting for leased line function
Remote terminal domain name
Remote terminal IP port
Save settings
Perform RESET, accept all parameters
The successfully established connection is indicated by the
control signal DCD and the message CONNECT.
AT**LL=2
AT**AUTOIP=<ip>
AT**AUTOPORTIP=<port>
AT**SAVE
AT**RESET
AT**LL=3
AT**AUTOURL=<domain>
AT**AUTOPORTURL=<port>
AT**SAVE
AT**RESET