Datasheet

INSYS GPRS 5.0 serial Installation
Mai 06 21
The connection to the web server is established with
ATD“www.insys-tec.de“:80<CR>
After the Connect you need to manually enter the following:
GET /1kb.txt HTTP/1.1<CR+LF> - When using Tera Term: <CR>
Host: www.insys-tec.de<CR+LF> - When using Tera Term: <CR>
<CR+LF> - When using Tera Term: <CR>
Note: Alternatively, the files 10kb.txt and 100kb.txt may be
retrieved.
<CR> - Return
<LF> - Space (line feed)
The words “GET” and “http” must be entered in capital letters.
After the Connect, the manual entry must be done very quickly. For this
reason, INSYS MICROELECTRONICS GmbH recommends the following:
Before you establish the connections enter the following lines in the Windows
editor:
ATD“www.insys-tec.de“:80
GET /1kb.txt HTTP/1.1
Host: www.insys-tec.de
Afterwards, copy line 1 into the terminal program and run <CR+LF>. After the
Connect, copy line 2 into the terminal program and run it with <CR+LF>. Finally,
copy line 3 and run it.
18. Connection to the application
For the operation, the application settings and the settings of the INSYS
GPRS 5.0 serial must be identical.
Application INSYS GPRS 5.0 serial