Datasheet

Functions and their Configuration INSYS GSM 4.2
INSYS GSM 4.2 compact
72 Sep-06
Note
By default, the switch outputs are set to switching via the com-
mand AT**OUT.
Example for switching the switch output 2 with the AT command AT**OUT
Enter the command AT**OUT2=1.
AT**OUT[<output>]=<status>
Meaning Parameters Possible
values
Meaning Default:
1
Switch output 1
Switch output, for which
the setting shall be valid.
<output>
2
Switch output 2
1
0
Switch output on normally
open
1
Switch output on normally
open
Requested status of the
switch output
<status>
PULSE<x
x>
Switch output is pulsed
<xx> times. The switching
process takes place in in-
tervals of seconds.
<xx> = Number of pulses
(two-digit)!
<xx> has a range of values
from 0 to 10.
0