Datasheet
INSYS GSM 4.2 easy Initial Operation
January 07 23
6. Select the following standard setting for the serial interface in the menu
Interface at the configuration PC:
If the INSYS GSM 4.2 easy is in an undefined state (e.g. due to a previous
configuration), reset it to the factory settings (button Send default settings), if
required. If the INSYS GSM 4.2 does not respond to the transmission of
commands, select the button Synchronize RS232 to automatically adapt the
baud rate and the data format.
7. Enter the PIN number (will be stored in the INSYS GSM 4.2 easy):
In the tab Basic settings you will find the setting New PIN. Enter the PIN for the
SIM card.
The PIN is stored in the INSYS GSM and is used for logging into the GSM
network at every restart. Transfer settings by activating the button Send
settings.