Datasheet

INSYS Modem 56k UL Command Overview

Juni 05 21

5 Technical Data

All data at nominal input, full load and 25°C ambient temperature. Stresses listed under

„Maximun Ring“ (one at time) may be applied to devices without resulting in permanent

damage. The operation of the equipment for extended periods may affect device reliabil-

lity. Limiting value tolerance are subject to usal flucation margins.

5.1 General

5.1.1 Key Features

• Mounting on DIN rail DIN EN 500 22

• Data, fax and SMS

services

• Power supply 10..60 V DC, 5% ripple

• Voltage level on the V.24 interface corresponding to V.28

• Protected V.24/V.28 interface with 9-pin SUB-D jack (screw-locked)

• Telephone interface via telephone socket (RJ 45) or screw terminal

• Reset by button or via screw terminal

• Watchdog

• Enhanced AT command set

• Auto answer mode

• 2 user profiles

• Hard-/software handshake

• 4 programmable telephone numbers (32 digits)

• Speed automatically adjustable or set

• Online retrain

• MFV dialing

• Flash function

• Alarm function

• Busy recognition

• Remote Control with password

• Callback security function with password

• Idle connection control (data transmit control)

5.1.2 Mechanical Features

Weight 250 g

Dimensions (max.) w x d x h = 55 x 110 x 75

Temperature range 0°C ..55°C

Protection class Housing IP 40/ Terminal IP 20

Humidity 0 - 95% not condensing

Note: The INSYS Modem 56K must not be used in wet environments.

Avoid using a telephone (other than a cordless type) during an electrical

storm. There may be a remote risk of electric shock from lightning.

support by network provider required