Datasheet

Technical Data
MRO-L200/-L210
Mobile communication
Frequency bands
MRO-L200 4G/LTE*: 800, 900, 1.800, 2.100, 2.600 MHz; LTE Cat. 3 (DL: max. 100 Mbps, UL: max. 50 Mbps)
3G/UMTS/HSPA: 900, 1.800, 2.100 MHz; UMTS, HSPA+ (DL: max. 42 Mbps, UL: max. 5,76 Mbps)
2G/GPRS/EDGE: 900, 1.800 MHz; GPRS/EDGE Class 12 (DL: max. 237 kbps, UL: max. 237 kbps)
MRO-L210
(US variant)
4G/LTE: 700, 850, 1.700/2.100 (AWS), 1.900 MHz; LTE Cat. 3 (DL: max. 100 Mbps, UL: max. 50 Mbps)
3G/UMTS/HSPA: 850, 1700/2100 (AWS), 1.900 MHz; UMTS, HSPA+ (DL: max. 42 Mbps, UL: max. 5,76
Mbps)
2G/GPRS/EDGE: 850, 900, 1.800, 1.900 MHz; GPRS/EDGE Class 12 (DL: max. 237 kbps, UL: max. 237 kbps)
Antenna connection 2x SMA female (2G/3G/4G: Main, 3G: Rx Diversity, LTE: MIMO)
SIM Slot for 1 Mini-SIM card (2FF), locked
Router
Function Up to 5 IP networks local (LAN) or as WAN, VLAN incl. tags and trunk ports; own DHCP server per IP
network, static routing, routing priority confi gurable; dynamic routing OSPF, BGP, RIP, RIPv2, RIPng;
netfi lters: DNAT, SNAT, IP/port forwarding, netmapping, IP fi lters (stateful fi rewall), DNS relay, dynDNS
support, Dual APN: traffi c division across 2 APNs - e.g. for separating payload and management data (only
cellular radio)
Security OpenVPN (client and server), IP fi lters (stateful fi rewall) also in VPN tunnel, several VPN tunnels in parallel
possible, IPsec, GRE (incl. multi-port), DMVPN, PPTP server
Redundancy WAN chains: several WAN accesses confi gurable (prioritised and event-controlled), WAN groups: parallel
operation of WAN interfaces or VPNs, several OpenVPN servers, additional redundancy via further MRcards
Ethernet switch, interfaces
Ports 5x RJ45, 10/100 MBit/s, full/half-duplex, auto MDI-X, 1.5 kV isolation voltage
Function Each port can be freely assigned to the IP networks, Link up/down detection, confi guration port
Digital inputs 2x digital inputs, 1x low-active, 1x high-active (as per EN 61131-2, Type 1)
Digital outputs 1x Open collector output
Events (selection) Change: input, Ethernet port, WAN chain, profi le, supply input, cellular fi eld strength; timer expiry, fi rewall
violation, login attempt detection, pulse sequence at digital input, counter
Event-controlled actions
(selection)
E-mail messages, SMS, SNMP traps, MCIP, start timer, profi le switching, connection switching, reset, log
out/turn off modem, activate fi rmware, pulse sequence
Serial interface
RS232 (Serial1) 1 x RS232 / D-Sub-9 (m)
Functions Serial-Ethernet gateway (incoming and outgoing connections, Modbus TCP/RTU gateway, modem
emulation, editable AT answer list, phone number conversion to IP addresses), PPPoE for external ADSL
modem
Operation
Wizards Confi guration of connection incl. VPN, adding LAN networks, quick start of icom Connectivity Suite – VPN
Help Web interface with inline help texts, online help, FAQ, exemplary profi les, plausibility check
Confi guration Local and remote web interface (http, https; with session management), command line interface (CLI),
Telnet, SSH, ASCII and binary fi le (also for backup), confi guration management with switchable profi les
(event-controlled)
Indications (LEDs) Power, WAN (Internet connection), 1x confi gurable, 1x Signal (for cellular radio)
Authentication Several users, different user roles and rights, RADIUS
Diagnosis Comprehensive log fi les, support package, integrated help functions, diagnosis tools: ping, tcpdump,
traceroute, DNS lookup, AT commands
Firmware updates Incremental, fail-safe, automated via update server (http, ftp, https, ftps)
Edge Computing
icom SmartBox Linux programming environment: creation of LXC containers for programs and scripts (apps),
ARMv7 CPU, 192 MB RAM, 2 GB fl ash memory
Additional features NTP client and server, buffered real-time clock
www.insys-icom.com
Technical Data Sheet
* Please check the availability of the LTE frequencies in the planned operating area.
Above specifi ed frequencies are currently used in Europe, Middle East, Africa and, to
some extent, in the Asia-Pacifi c region and South America.