Manualshelf

User's Manual

ManualsBrandsINSUNG Electronics ManualsElectronicsSound Port DirX
12345
pairing information. In this case, the AG with HFP profile should be the primary AG and HSP
should be secondary.
<Available Multi-Point Pairing setting up with Sound Port II>
BT Phone A BT Phone B SoundPort II
HFP HSP OK
HSP HFP OK
HFP HFP Not support
HSP HSP Not support
4. Sending and receiving a call
In order to make a call, press the talk button on the headset, then the call will connect
at the primary device.
If you push the talk button shortly, the last number will be redialed and if you press the
talk button for 2 seconds and more, the voice dial will be operated.
(Voice dial function will be supported depends on the kinds of Mobile phones)
To receive a call, push the talk button shortly and if you want to reject the call, press
the talk button for 2 seconds and more.
If you have another call while you are having a call on the primary device, you will hear
the melody from the secondary device. If you push the talk button shortly, the
connection at the primary AG will be discontinued and the push the talk button shortly
again, the call from secondary AG will be connected.
After complete the call, press the talk button, then you can make another call from
Primary AG again.
5. Charging
- Connect the power cable to Mini USB port.
- Red LED will be turned on during charging, then it will be turned off after full charge.
6. Button Operation
* VOL (+/-) Button
1) Press “Vol (+) button” and “Vol (-)button” at the same time for 2 seconds, it goes pairing
mode.
2) Press the Vol (+) button shortly, volume lever will increase by one step.
Press the Vol (+) button longer, volume level will increase continuously.
3) Press the Vol (-) button shortly, volume level will decrease by one step.
Press the Vol (-) button longer, volume level will decrease continuously.
* Talk Button
1) Press Talk button for 2 seconds when it’s Power Off, it will be turned on.
2) Press Talk button for 6 seconds when it’s Power On, it will be turned off.
3) Press the Talk button shortly to receive a call.
4) Press the Talk button for 2 seconds and more to reject a call.
5) It will be disconnected when you push the Talk button shortly during the phone.
6) If you press the talk button for 2 seconds and more while you are on the phone, phone
mode will work on the Mobile phone from Headset.
* MIC Gain Select Switch
1) Switch UP: High Gain
2) Switch down: Low Gain