User's Manual

5. Operating Process
1) Power On/Off
- Power ON
Press Talk button for 2 seconds, Blue LED will blink 3 times when it’s Power Off.
- Power OFF
Press Talk button for 6 seconds. Red LED will blink 4 times indicate Power Off.
2) Reset Device List
In order to set Primary AG (Audio Gateway), you should delete address memorized in the
headset.
Press Talk button and Vol(-) button at the same time for 2 seconds and more, then Red and
Blue LED will blink 2 times.
3) Multi-Point Pairing
Sound Port II has an ability to pair with 2 Audio Gateway or the BT Cell phone at the same
time. When you have another incoming call while you are on the phone, you will hear an
incoming call signal through the headset. Then the call you've had will be disconnected and
the new caller will be connected.
It’s possible to have Two Profile (HFP/HSP) connection simultaneously. (Multi-Point Connect
function)
To initiate the device pairing, it’s required to reset the other AG pairing information
memorized on the headset.
Please refers to 2) Reset Device List for the reset method.
Press “Vol(+) button” and “Vol(-)button” at the same time for 2 seconds when it’s Power On,
it goes pairing mode.
Red LED and Blue LED will blink alternately.
When linking the device supporting HFP first, RED LED and BLUE LED blink for three
times which is a pairing mode signal.
Then press VOL (+) and VOL(-) simultaneously again for 2 seconds and more, then
the previous connection with AG will be end.
Connect 2nd AG supporting HSP and choose Soundport II from Bluetooth list of AG and
press a connection button, then the connection with two devices is completed.
When linking the device supporting HFP first, RED LED and BLUE LED blink for three
times which is a pairing mode signal.
Then press VOL (+) and VOL(-) simultaneously again for 2 seconds and more, then
the previous connection with AG will be end.
Connect 2nd AG supporting HSP and choose Soundport II from Bluetooth list of AG and
press a connection button, then the connection with two devices is completed.
HFP will be primary AG and HSP will be secondary AG.
* Attention facts when pairing with two Mobile phones:
It's unable to pair SoundPort II with a same profile at the same time.
One should be HFP and the other should be HSP. Also if you registered a new AG, press
Talk button and Vol (-) button at the same time for 2 seconds and more in order to delete the