User's Manual

Pairing and Connecting to a Bluetooth Headset or Handsfree device:
Bluetooth devices must be both Paired and Connected:
Pairing establishes a secure link between two Bluetooth devices.
Connecting creates an audio or control connection between two Bluetooth devices.
To Pair BluPAL to ELI or SoundPort:
Make sure BluPAL is using the Headset profile (see Switching Profiles).
Turn both devices off.
Put ELI into pairing mode by pressing and holding ELI’s Master Control for 7 seconds (or until the LED
flashes alternately red and green rapidly).
Put BluPAL into auto-pairing mode by pressing and holding BluPAL’s Master Control for 7 seconds (or
until the LED flashes red and green).
BluPAL will now automatically pair to ELI.
To Connect BluPAL to ELI or SoundPort:
Make sure the devices are paired (you only need to do this once).
Turn on both BluPAL and ELI.
Firmly press the Master Control on BluPAL.
Listen for the “Ringtone” on ELI.
Firmly press the Master Control on ELI.
Other Headsets:
BluPAL should work with most Bluetooth headsets and handsfree devices, provided the other device uses the
standard “0000” PIN code. Because of the simplified BluPAL auto-connect interface, other PIN codes are not
supported).