User's Manual

Pairing and Connecting to BluPAL Headphones:
• Make sure BluPAL is using the Advanced Audio profile (see Switching
Profiles).
• Turn both devices off.
• Put the BluPAL Headphones into Pairing mode: Turn on the Headphones
while pressing and holding the Headphone Master Control for seven
seconds. The Headphone LED will flash red and blue.
• Put BluPAL into auto-pairing mode by pressing
and holding Master Control for 7 seconds (or
until the LED flashes red and green).
• BluPAL will automatically pair and connect to
the stereo headphones.