Users Manual Part 5
207
Taking Care of Your Controller and Pod 1414 Taking Care of Your Controller and Pod
USB cable
Caution: Use ONLY the USB charging cable that you received in the box
with your Controller. AVOID using alternative charging cables or other
accessories, as they may damage the Controller or aect the way it charges in
the future. If you must use a dierent cable, use only cables less than or equal
to 4 feet (1.2 meters) in length.
Note: You can use the Controller while it is charging.
Cleaning Your Controller
Always keep your Controller USB port free of debris and liquids. Dirt, dust, and
liquids can impair the functionality of your Controller or damage it.
Caution: DO NOT use solvents to clean your Controller. DO NOT immerse
your Controller in water as it is not waterproof. e use of solvents or
immersion in water could cause the Controller to malfunction.
To clean your Controller:
1. Press the Power button briey to put your Controller to sleep.
2. Wipe the outer surface of the Controller with a damp, lint-free cloth. If
necessary, use a solution of a mild detergent mixed in warm water on the
cloth.
3. Dry the outer surface with a dry, lint-free cloth.
Caution: DO NOT allow debris or liquid to get into the USB port, speaker,
sound/vibrate button, or Power button while cleaning the Controller. Failure
to do so may result in damage to the Controller.
Every time you clean your Controller, examine the entire Controller for
discoloration, cracks, or separations. Also, check for deteriorating performance,
such as illegible messages, button malfunction, or repeated communication
failures. If you notice any signs of deterioration, stop using the Controller. Contact
Customer Care if you have questions.
If You Drop the Controller
Shock or a severe impact can damage your Controller. If you drop the Controller
or if it is otherwise subjected to severe impact:
1. Inspect the outside of the Controller for visible signs of damage.