Users Manual Part 4
Managing Software Updates 12
148
12 Managing Software Updates
12.1. Insulet-provided Controller
When connected to a network, the Omnipod 5 Controller oers over-the-air
updates when a soware update is available. ere are two types of updates for
the Omnipod 5 Controller: OS (Operating System) updates and Omnipod 5 App
updates. OS update refers to updating the operating system of the Controller.
Omnipod 5 App update refers to updating the Omnipod 5 App on the Controller.
When an update is available, you will receive a notication prompting you to
update.
Note: You will not be able to navigate in the Omnipod 5 App during an Omnipod
5 update; however, your insulin therapy will not be impacted. e Pod continues
delivering insulin and will re-establish connection with the Omnipod 5 App once
the update is complete.
Note: e Controller must be connected to a network to receive over-the-air
updates. If you turn Airplane Mode ON, you may miss important updates.
Note: All updates on the Controller that are considered optional require a Wi-Fi
connection.
Note: If you have an immediate bolus in progress, soware updates will be
delayed until the bolus is complete.
Caution: ALWAYS make sure your battery has adequate charge prior to
installing a soware update.
Caution: Connect ONLY to trusted Wi-Fi networks with your Controller
or smartphone. AVOID connecting to public Wi-Fi networks, such as those
found in airports, coee shops, etc, as these networks are not secure and could
result in exposing your Controller or phone to malware. DO NOT connect to
public Wi-Fi networks during rst-time setup of your Omnipod 5 System.
Operating System (OS) Update
Operating System (OS) updates may be either "optional" or "required." Required
updates require you to perform the update immediately before you can use the
Omnipod 5 App. Optional updates may be postponed to a later time.
To download and install an OS update on the Controller:
1. Ensure your Controller is currently charging or the battery is charged to
above 40%.
Note: If your Controller is currently charging, the battery must be above
20%.
2. Tap Update Now.
e Omnipod 5 Controller begins to update.
Once the update is complete, you will see a conrmation screen.