Users Manual Part 4

Alarms, Action and Reminder Notications 13
162
13 Alarms, Action and Reminder Notications
Check alarms
Before you begin, switch to Manual Mode if currently using Automated Mode.
See "22.2. Switching from Automated Mode to Manual Mode" on page 300.
Note: Your Controller or smartphone sound settings must be ON to hear a tone
on the Omnipod 5 App.
To verify that your Omnipod 5 App and Pod's alarms and vibration functions are
working properly, test them as follows:
1. Navigate to: Menu button ( ) > Settings > General > Check Alarms.
2. If you have an active Pod, tap PAUSE INSULIN and tap YES.
3. Tap CHECK ALARMS to initiate the alarm check.
4. Listen and feel: e Controller or smartphone running the Omnipod 5 App
beeps and vibrates three times. If you are wearing a Pod, the Pod beeps several
times and sounds the alarm tone for several seconds.
5. If the Pod did not beep, tap NO. en either tap CHECK AGAIN to retry testing
the alarms, or tap DONE and change your Pod.
6. If the Omnipod 5 System alarms did not sound, tap NO. en either tap
CHECK AGAIN to retry testing the alarms or contact Customer Care.
7. If the beeps and vibrations worked properly, tap YES. If you paused insulin to
check the alarms, tap YES to start insulin delivery.