Users Manual Part 4

Alarms, Action and Reminder Notications 13
160
13 Alarms, Action and Reminder Notications
Canceling temp basals and boluses
Cause Omnipod 5 App Pod
Tone informs you that
the temp basal or bolus
has been successfully
canceled. You cannot
turn these OFF.
No tone/vibration Beeps once when you
cancel a temp basal,
bolus, or extended bolus.
Pod activation / Pod deactivation
Cause Omnipod 5 App Pod
Tones or vibrations
occur at various
times during the Pod
activation process to
indicate progress. You
cannot turn these OFF.
Tone/vibration when
the Pod and Omnipod
5 App are successfully
paired.
Sounds tone/vibrates
twice when the Pod is
successfully deactivated.
Beeps twice when it
has been lled with
the minimum amount
of insulin needed for
activation (see page 85).
Beginning 10 minutes
aer the Pod is lled
with insulin, beeps every
ve minutes until insulin
delivery has started.
13.5. Responding to Alarms
Caution: AVOID leaving your Controller or smartphone in a place that
would prevent you from hearing alarms and notications from your
Omnipod 5 App. Delivery of insulin in Manual Mode or Automated Mode
continues as programmed if you move away from your Controller or
smartphone.
Caution: AVOID setting your Controller or smartphone to Silent, Vibrate
or any other setting that prevents you from hearing alarms and notications
from your Omnipod 5 App, such as Digital Wellbeing for Android tools that
limit sounds and notications.If you do not hear alarms and notications
from your Controller or smartphone, you might not make the changes you
need to make to your insulin therapy in a timely manner. Your Pod will still
sound, and you will be able see the Alarm or Notication displayed on the
Omnipod 5 App. See "13.3. Sounds and Vibrations" on page 157 to learn how
to manage sounds and vibrations.
Note: e Omnipod 5 System on your smartphone requires Do Not Disturb
permission and Notications to be turned ON to ensure you always receive