Manualshelf

Users Manual Part 4

ManualsBrandsInsulet ManualsPower ToolsOmnipod 5 SAW Pod
11121314151617181920
157
Alarms, Action and Reminder Notications 1313 Alarms, Action and Reminder Notications
3. When nished, tap the back arrow to exit ( ). Unread notications have
colored icons described in "13.1. Types of Alarms and Notications" on page
155.
Note: When a notication has been displayed on this screen, and you have exited
by tapping the back arrow ( ), the icon for those notications will be gray the
next time you view this screen.
13.3. Sounds and Vibrations
e Omnipod 5 System uses sounds and vibrations to attract your attention to an
alarm or notication.
Caution: AVOID setting your Controller or smartphone to Silent, Vibrate
or any other setting that prevents you from hearing alarms and notications
from your Omnipod 5 App, such as Digital Wellbeing for Android tools that
limit sounds and notications. If you do not hear alarms and notications
from your Controller or smartphone, you might not make the changes you
need to make to your insulin therapy in a timely manner. Your Pod will still
sound, and you will be able see the Alarm or Notication displayed on the
Omnipod 5 App.
Note: e Omnipod 5 System on your smartphone requires Do Not Disturb
permission and Notications to be turned ON to ensure you always receive
important safety alarms. You cannot use the App until Do Not Disturb permission
is provided and Notications is turned ON.
Tip: To test the sounds and vibrations, see "Check alarms" on page 162.
Pod alarms
e Pod sounds a tone when it detects a problem that can aect insulin delivery.
• Pod hazard alarms are continuous tones broken up periodically by a set of
beeps.
• Pod advisory alarms and notications are intermittent beeps, which
periodically repeat until you acknowledge them.
Omnipod 5 App alarms
Omnipod 5 App alarm sounds are dependent on your Controller or smartphone
sound settings, for example, silent or vibrate setting.
The Sound/vibrate button on your Controller
e Sound/vibrate button, located on the upper right side of the Controller,
controls whether all notications use vibrations or sounds.