Users Manual Part 4

Alarms, Action and Reminder Notications 13
156
13 Alarms, Action and Reminder Notications
hazard alarm that most recently occurred will be displayed rst on the
Omnipod 5 App. Any Pod hazard alarms will be sounded on the Pod.
• Advisory alarms are low-priority alarms that indicate that a situation
exists that needs your attention. Advisory alarms will repeat every 15
minutes until acknowledged (see Alarm tables for additional details) and
continue on the Pod until acknowledged in the Omnipod 5 App. See
"13.7. Advisory Alarm List" on page 171.
• Notications:
• Action Item notications are tasks that need your attention. See page
156.
• Reminder notications remind you about an action that you may
want to perform. See "13.11. Reminder Notications List" on page 199.
• Communication error messages display when the Omnipod 5 App is
unable to communicate with the Pod. See "26.5. Pod Communication
Issues – "Try Again"" on page 337.
For how to view the alarms and notications history, see page 156.
For Dexcom G6 alarm information, see the Dexcom G6 CGM System User Guide.
13.2. Alarms and Notications Screen
To review past alarms and notications:
1. Tap Menu button ( ) >
Notications.
Messages from today are displayed
rst, with newest at the top of the
screen and oldest at the bottom of the
screen.
2. To display a specic date range, tap
FILTER BY DATE.
a. Tap the starting date on the
calendar.
Note: Tap the "<" arrow to view
an earlier month.
b. Tap END at the top of the screen.
c. Tap the ending date for the date
range.
d. Tap OK.