Users Manual Part 3

Changing Settings 10
124
10 Changing Settings
10.1. General Settings
Warning: DO NOT start to use your system or change your settings without
adequate training and guidance from your healthcare provider. Initiating and
adjusting settings incorrectly can result in over-delivery or under-delivery of
insulin, which could lead to hypoglycemia or hyperglycemia. Settings that
impact insulin delivery mainly include: Pod Shut-O, basal rate(s), Max Basal
Rate, Max Bolus, Correction Factor(s), Insulin to Carb (IC) Ratio(s), Minimum
Glucose for Calculations, Target Glucose and Correct Above, and Duration of
Insulin Action.
Some settings dier between the Insulet-provided Controller with the
Omnipod 5 App and the Omnipod 5 App on your smartphone.
If you are using the Controller, settings allow you to change your network
connectivity, screen display settings, lock screen settings, and time zones. You can
also check alarms and reset the Controller.
If you are using your smartphone, settings allow you to change your insulin
delivery time zone. You can also check alarms and reset the app.
Network Connectivity
Airplane Mode is a device setting that turns o cellular and Wi-Fi network
connectivity. Airplane Mode can be turned ON or OFF.
Note: ough the Omnipod 5 System does not require constant network
connectivity, frequent connectivity (either cellular or Wi-Fi) is needed for optimal
use of the system, such as if you typically share your glucose data with a care
partner. Consider re-enabling Wi-Fi aer turning on Airplane Mode for optimal
system use.
Note: On the Controller, Bluetooth connectivity is not aected. If you are using
your smartphone, make sure to check that Bluetooth is enabled aer you turn ON
Airplane mode
Note: ALWAYS keep the Bluetooth setting ON. If you turn this setting OFF, you
will not be able to use the Omnipod 5 App.
Airplane mode
To turn Airplane Mode ON or OFF on the Controller:
1. Navigate to: Menu button ( ) > Settings > General.
2. Tap the Airplane Mode toggle to turn Airplane Mode ON or OFF.