Users Manual Part 3
107
Temporary Basal Rates and Presets 77 Temporary Basal Rates and Presets
7.3. Canceling a Temp Basal or Temp Basal Preset
A temp basal stops automatically at the end of its time period and the last
scheduled Basal Program starts.
To cancel a temp basal before the end of its time period:
1. Navigate to the Home screen's TEMP ON tab.
2. Tap CANCEL.
3. Tap YE S to conrm cancellation. e Omnipod 5 App cancels the temp
basal and starts the last scheduled Basal Program.
7.4. Creating a New Temp Basal Preset
To create a new temp basal preset:
1. Navigate to: Menu button ( ) >
Temp Basal Presets.
2. Tap CREATE NEW.
Note: If you already have 12 temp
basal presets, CREATE NEW does not
appear. If necessary, you can delete an
existing preset.
3. Tap the Preset Name eld and enter a
descriptive name for your preset.
4. Optional: Tap a tag to appear beside the
name of the new preset. Tap a second
time to deselect the tag. If you do not
select a tag, a default tag is used.
5. Tap DONE.
Note: e default name for the preset
is "Temp Basal" followed by a number.
6. Tap NEXT.
7. Tap the Basal Rate eld and scroll to the desired value.
• If using a percent (%) change:
An UP ARROW ( ) indicates increasing the basal rate above that of
the Basal Program in progress.
A DOWN ARROW ( ) indicates decreasing the basal rate below that
of the Basal Program in progress.