Users Manual Part 2

89
Activating and Changing Your Pod 55 Activating and Changing Your Pod
4. Tap the DETAILS tab to add a detail about the placement of this Pod. For
example, you could add a detail that says "Facing up" or "Facing down" to
describe the Pod's orientation.
a. To add a new detail, tap ADD NEW and type in the new detail. Tap ADD
when done. e new detail is added to the list.
b. Select a detail for the new Pod by tapping the circle next to that detail. You
may only add one detail for each Pod. Tap again to deselect the detail.
Note: To delete a site detail, tap the next to the detail.
5. Tap DONE when nished to return to the Change Pod screen.
Prepare the infusion site
To reduce the risk of infection at the infusion site:
1. Wash your hands with soap and water.
2. Wash your selected infusion site with soap and water.
Note: Antibacterial soap may irritate skin, especially at the infusion site. Ask
your healthcare provider how to treat any skin irritation.
3. Dry the infusion site with a clean towel.
4. Use an alcohol prep swab to disinfect the infusion site. Start at the center of
the site and gently rub outward in a circular motion.
5. Let the infusion site air-dry thoroughly. Do not blow on the site to dry it.